Customize Strong Silicone Glass Metal Polymer Adhesive Nail Free Glue
Customize 6ml 12ml 50ml 120ml Strong Nail-free Glue Silicone Glass MS Glue Polymer Adhesive Sealant contains more glue than the one in aluminium tube.Tehy can stick various materials such as metal, rubber, hard plastic,ceramics and glass quickly under normal temperature. They can be widely used for production and repair in various industries such as electric equipment, instrument, machine and automobile, especially for industrialized streamline operation.
|
Model no.
|
Nail-free Glue
|
|
Solid conternt
|
65%
|
|
After curing hardness
|
70-85B
|
|
concentraion/viscosity
|
4800mpa.s
|
|
Color
|
Milk white glue
|
|
Suface drying time
|
2-5 minuters or so
|
|
Copmletely cure time
|
24 hours
|
|
Glial
|
all transparent,soft glue,medium and high strength
|
|
Characteristics
|
no yellow, low suction, low odor. New cover tube, simple to use
|
Selfie Ring Light with Tripod Stan’d
Our products have the following advantages:
1.6ML/12ML/50ML/120ML Nail-free Glue
2. Good viscosity and durability, waterproof and easy to use.
3. Can be suitable for a variety of materials, outdoor indoor, walls, ceramics, metal, wood. Such as the kitchen, toilet, wall accessories, put in the object frame. Replace of screw drilling.
4. Features: no yellow, low suction, low odor. New cover tube, simple to use.
Usage and precautions 1 Read the instructions before use. Can only be used in a well-ventilated environment. The bonding surface should be clean, dry and free of dust. Roughen the surface before use to ensure the bonding strength. It can be used between 10 ° C and 32 ° C. The temperature between 21 ° C and 29 ° C is better. After curing The temperature range that the glue can withstand is between -40 ℃ and 66 ℃. Do a small area test before the official use.
2 Apply it directly to the surface to be bonded, and press firmly. After about two minutes, it will start to thicken, and it will start to solidify after 2-5 minutes. To achieve higher strength, let the bonded parts dry for 24 hours. When the temperature is low, the curing time will be prolonged, and when the temperature is high, the curing time will be shortened. You can use a hand-held electric hair dryer to speed up the curing.
3 You can use acetone or turpentine to remove the wet glue. The cured material can be cut off or scraped off with a tool.
4 If this universal adhesive is used for bonding fabrics, do not dry-clean the fabrics. 5 This universal adhesive is not recommended for bonding polystyrene foam, polystyrene, polyethylene, polypropylene plastic. Storage method: Store at a temperature of 10 to 27 Freeze / thaw: let the product reach room temperature before opening the lid
